Future Tech Girls

Unveiling the Future of Tech, Rocking the Gaming World, Navigating Sassy Socials, and Delivering Kickass Tips

Permanent Fixes for the PS4 Blue Light of Death

Untitled design - 2023-01-06t091855.957

Are you feeling blue over your PlayStation 4? If so, you might be a victim of the dreaded PS4 Blue Light of Death. Don’t worry though – there is hope! In this blog post, we’ll discuss how to identify and fix the Blue Light of Death so you can get back to your favorite games faster. Let’s start our journey to PS4 salvation now!


The PlayStation 4 is an advanced video game console designed to bring users an immersive gaming experience. Unfortunately, some users have experienced a hardware malfunction known as the “blue light of death” (BLOD). Receiving this error can be a frustrating experience, but there are some steps that you can take to attempt to fix it.

In this article, we will discuss how to identify and troubleshoot the blue light of death:

What is the PS4 Blue Light of Death?

The PlayStation 4 Blue Light of Death (BLOD), is an error indicating a hardware malfunction that requires the console to be repaired. When the blue light appears, it indicates that the internal hardware has failed and the console will not start. Technically speaking, this hardware issue is characterized by two separate LED signals—a flashing blue power light and a blinking red status indicator light.

This is accompanied by lack of video output and audio.

When this issue occurs, users are often presented with no choice but to send their console in for repair or replacement service provided by Sony via support services. Common repair expenses associated with a BLOD include:

  • Parts replacement
  • Labour fees
  • Shipping costs

While some repairs under warranty may be completely covered.

Untitled design - 2023-01-06t091809.951

Causes of the PS4 Blue Light of Death

When the Playstation 4 (PS4) is experiencing the infamous “Blue Light of Death” (BLOD), it’s not outputting a video signal. This isn’t an error with the software, but a hardware failure in which components of the display are not working appropriately. Before you can begin to troubleshoot and fix your PS4, it’s important to understand what causes this particular issue.

The BLOD typically occurs because of one or more hardware components failing in your PS4. These components include:

  • The power supply unit (PSU)
  • HDMI/AV cable
  • Bad connection between the main board and display
  • Defective disc drive

In addition to hardware issues, the Blue Light of Death could also be a sign that there is something wrong with your console’s software or operating system. Some common causes for software failures include viruses or malware, interference from other wireless devices, power surges, and data corruption.

How to Check if Your PS4 Has the Blue Light of Death

If your PlayStation 4 has suddenly stopped working and you’re seeing a blue light flash in the power indicator, it may have the ‘Blue Light of Death’. The BLoD can cause your system to appear frozen or unresponsive and is usually accompanied by audio buzzing.

Before attempting any repairs, it’s important to confirm that the problem is definitely with your PS4 hardware and not with a game or other software.

To determine if your console is suffering from the Blue Light of Death:

  1. Check that all cable connections are secure – give special attention to the HDMI connection which can work its way loose with time and use.
  2. Look at the indicator light on front of your PS4 console – it should be solid blue meaning that the console has successfully powered on, or yellow indicating rest mode. If it is pulsing blue, then this indicates that there’s an issue preventing it from booting up normally, like an E-Field (EBOD) issue or hard drive issue, so try re-seating both cables and restarting your console.
  3. Listen for audible buzzing from multiple speakers – this may be a sign that something’s wrong. Check for warped/burned connectors near where cables enter the console – this too could be another sign of EBOD issue.
  4. See if you can hear disc spinning when inserting or ejecting DVDs or Blu-ray discs – if not, there could potentially be problems navigating through menus as well as playing movies with no audio output.

How to fix ps4 blue light of death

Untitled design - 2023-01-06t091950.453

The PS4 Blue Light of Death (BLOD), is unfortunately, a common issue with the PS4 gaming console. It may occur for a variety of reasons and can be difficult to diagnose and fix. The BLOD occurs when the PlayStation 4 console does not properly enter an active “rest mode” or when it enters an endless loop of powering down and teetering just between power on and complete power off states.

If your console is exhibiting the BLOD, you’ll typically notice that it does not power up, fans are running loudly or not at all, blinking blue light, unusual sounds from within the heating panel or all of these together. Fortunately there are multiple methods that can be used to help repair the BLOD and get your system running again. Before attempting any potential repair solutions, however, make sure to check if there is an available update available for your PS4 so that it has the latest version installed with all updated firmware.

Once you’ve ensured your system’s firmware is up-to-date; Here are some repairs that may help resolve your Blue Light of Death issue:

  1. Hard Reset – This involves turning off your PS4 gaming console by pressing and holding down both the power button on top until you hear two beeps (approximately seven seconds). This should restart and reset your device hopefully restoring normal functionality.
  2. Unplugging Power Cable – If a hard reset did not work then you may need to unplug any external power cable from AC source then plug back in after about five minutes allowing time for any residual charge in the device to dissipate. Similarly wait 5 minutes before powering back on again allowing time for components within device to reset properly . Once powered up check if device turns back on normally .
  3. Tighten Connections – Occasionally cables internally become loose overtime due to general handling which can cause instability leading to random shut downs , which could contribute/ cause blue light of death issue . Tightening screws at back panel/ base cover plate can often fix this problem as loosening connections inside will render certain parts useless without making contact with motherboard or other important components leading circuit overloads or unexpected crashes resulting in blue light errors e.g fan contact points seating board connections respectively .
  4. Repositioning Internal Cables – An alternative solution well known among engineers is removing internal cables e.g ribbon cables connecting optical drive , memory cards etc connection ports securing them into place using screws , reinserting internal cables making sure they make secure contact as this can sometimes trigger component centric issues without proper attachment leading over heated systems or random shutdowns also affecting blue light problems . Additionally test other similar pieces of hardware if their possible connectivity issue exists elsewhere means there could be greater obstruction causing loss wired connections through prolonged use inside time frame since last psu inspection & maintenance build was done .

How to Prevent the PS4 Blue Light of Death

If you’re a PS4 user, your console could experience the so-called “Blue Light of Death.” This is a common issue that users confront when their console stops working properly and the light on the front of it turns blue. It can be a frustrating experience, but there are some steps you can take to prevent it from happening and to correct it once it has occurred.

One of the main causes of the dreaded blue light is overheating, which can occur if too many devices are plugged in or if there isn’t enough ventilation in your entertainment center. The key is to make sure your system is always well ventilated with plenty of space for air to circulate and not overheat. Discontinue using other devices plugged into the same power strip or circuit as your PS4 and unplug or switch off any extra consoles in the same room as well. Make sure nothing is blocking any vents or fans on your PS4 and that you dust off all its dust filters from time to time.

Another easy fix is to keep track of when updates are released for new games and systems so you don’t overload your console with too many downloads at once, which can cause freezing and lagging issues that may lead to a blue light appearing. Try also scheduling regular restarts so all existing applications running in the background close properly. If a restart isn’t possible at that moment, use external memory sticks instead of downloading data directly into internal memory for smoother gameplay sessions.

Using these basic tips will help ensure your PS4 doesn’t suffer from the Blue Light of Death like so many other users have had to endure – because after all, gaming should be fun!

Finally, if you find that none of the above solutions work for you, then your last option is to contact Sony Support or take your unit to a professional repair service for diagnosis and repairs.

Play Station 4 Blue Light of Death can be tricky to fix, so it’s important to make sure that all the possible causes are eliminated before investing in repairs. With the right information and approach, you can save yourself a lot of time and money.